HDPE Butt Fusion 45 Degree Elbow

The HDPE Butt Fusion Fittings developed and produced by Puhui has excellent properties of strength and wear resistance.

Puhui HDPE Butt Fusion Fittings are widely used in PE pipe connection

The outer diameter of HDPE butt welded pipe fittings should be exactly the same as the HDPE pipe. Use the HDPE pipe butt welding machine to fuse the two ends at a certain temperature and time, then remove the heating plate and bond the two ends tightly together under a fixed pressure until it cools.

HDPE 45 Degree Elbow Usage

The 45 Degree Elbow is a pipe connector that is used to change the flow direction of a pipe. It is used in the following ways.

1. Connecting Straight Pipes: Connect the HDPE 45 Degree Elbow with two sections of straight pipes to make the pipes turn at a certain angle.

2. Connecting curved pipes: When it is necessary to connect two sections of already curved pipes, the HDPE 45 Degree Elbow can be used to realize a smooth transition.

3. Height adjustment: When the pipe needs to be adjusted in height, it can be realized by adding an appropriate number of elbows.

4. Solving space limitation: In the case of space limitation, the elbow can be used to change the direction of the pipeline to fit the space requirement.

5. Pipe Drainage: In the drainage system, 45 45-degree elbow is often needed to realize the smooth drainage of pipes.

It should be noted that when installing HDPE 45 Degree Elbow, it is necessary to ensure that the connection is firm and there should be no leakage and other problems. In addition, depending on the actual situation and piping requirements, it is necessary to select the appropriate material and size for 45 45-degree elbow.