HD-INERTSYS® Inert Gas Fire Suppression Systems
HD-INERTSYS® Inert Gas Fire Suppression Systems
HD-INERTSYS® System is a clean agent fire suppression system (IG55, IG541, IG100, IG01). It is particularly useful for suppressing fires in hazards, where an electrically non-conductive medium is required; where clean-up of other extinguishing agents is a problem; or where the hazard is normally occupied and requires a non-toxic extinguishing agent. It is very effective in extinguishing Class A, Class B as well as Class C fires. HD-INERTSYS® works by completely flooding the room, reducing the oxygen content necessary for combustion, but at the same time ensuring that there is adequate oxygen concentration for use in occupied area. HD-INERTSYS® is VdS Approved system.
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Description
- Designed for IG55 (50% Argon and 50% Nitrogen), IG541 (52% Nitrogen, 40% Argon and 8% Carbon dioxide), IG100 (Nitrogen) and IG01 (Argon) agents
- Gases are colourless, odourless, and electrically nonconductive with a density approximately the same as air
- Cylinder Sizes: 80 and 140 litre
- Operating Pressure: 200 bar (2900 psi), 300 bar (4351 psi), depending on volume and concentration requirements
- Releasing Device: Manual, Pneumatic, Electro-Magnetic
- Available with Selector/Directional valves for protection of multiple areas with a common gas bank
- Approval: VdS
- System Design Calculations performed using VdS calculation software
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Your review cannot be sent
HD-INERTSYS® Inert Gas Fire Suppression Systems
HD-INERTSYS® System is a clean agent fire suppression system (IG55, IG541, IG100, IG01). It is particularly useful for suppressing fires in hazards, where an electrically non-conductive medium is required; where clean-up of other extinguishing agents is a problem; or where the hazard is normally occupied and requires a non-toxic extinguishing agent. It is very effective in extinguishing Class A, Class B as well as Class C fires. HD-INERTSYS® works by completely flooding the room, reducing the oxygen content necessary for combustion, but at the same time ensuring that there is adequate oxygen concentration for use in occupied area. HD-INERTSYS® is VdS Approved system.